Automotive Cleanrooms

Airology are experts in Automotive Cleanrooms.

Cleanrooms create controlled environments to facilitate the production of safe and effective components and parts. We produce bespoke quality cleanrooms for automotive manufacturers, making the best use of space to ensure sterile, controlled environments for procedures and preparation.

Get in Touch

Why Automotive manufacturers need a cleanroom

Certain automotive parts, such as circuitry, are particularly sensitive to particulate matter. Even a small amount of dust or particles in sensitive components can result in finished products that are defective or unreliable. Any vehicle going to market with contaminated parts is unsafe, and therefore a considerable risk to the manufacturer.

Automotive Cleanroom Classification

The classification of cleanrooms determines the number of airborne particles permitted per cubic metre of space. There are three main classifications that we work with: ISO, GMP and FED.

All of these classify cleanrooms based on the maximum allowable concentrations (particles/cubic metre) for particles of certain sizes for each class.

ISO standards, derived from ISO 14644-1, are numbered 1 to 9, with 1 being the cleanest and 9 being similar to any other, non-ventilated room.

What are the Requirements for a Cleanroom in the Automotive Industry?

To minimise the risk of contamination in an automotive component, a cleanroom facility in the automotive industry is generally built to ISO classes 5-8. In practical terms, this means between 25 and 240 air changes per hour to remove particulate matter and microorganisms.

Depending on the sensitivity of the materials used, your cleanroom may also require control of light levels, temperature, humidity and air pressure to preserve functionality.

The requirements of your specific cleanroom project will depend on the intended use and design. Our cleanrooms are validated by an independent inspector on completion, so you can be confident that the installation meets ISO requirements.

Why work with Airology Systems for your cleanroom?

With over 25 years of experience in the cleanroom industry, we have extensive knowledge of cleanroom technology and classifications. With this knowledge and experience, we support you with the design and management of your whole cleanroom project, from initial concept to completion.

Once the design is finalised, we provide and liaise with specialists to install high-tech, high-quality solutions, creating a secure, controlled environment in your space. We are available for guidance throughout the project, by phone or email, and happy to offer advice where needed. On completion of the build, we arrange an independent validation assessment, giving you confidence that our solutions meet the specifications required.

Get in Touch

Automotive Case Studies

Andel Plastics Ltd, ISO 8 Cleanroom, Birmingham

Automotive, ISO 7 Cleanroom, Bolton

What our customers say…

“Throughout the project Airology provided us with guidance and their expertise to ensure that the installation met our specific requirements and was completed on time. We are delighted with our state of the art Clean Room and the professional approach and support given to us by the Airology team was invaluable.”

Andrew Stringer Managing Director, Entaco Ltd

“During the initial design and build we worked closely with Airology to create a facility that will provide one of the most comprehensive GMP stability storage and testing services in Europe. Working with Airology as the principal contractor enabled us to deliver a significant building project, on-scope, on-time and on-budget.”

Mark HammondManaging Director, Intertek Melbourn Scientific

“We have used Airology extensively to install air conditioning in Grosvenor House so wanted them to handle the M & E but we also wanted a single locally based supplier for the refurbishment contract. Airology were able to provide a comprehensive service including the raised floor, ceilings, decoration and carpeting as well as the M & E and the project came in on budget, on time and the quality was excellent.”

Mark RobertsManaging Director, Loxton Developments Ltd

“Airology provided us with a bespoke, managed development which has allowed us to double our production output. The service and communication which we received at all stages of the project was excellent and any impact on our production was kept to an absolute minimum. Malosa Medical would definitely recommend Airology.”

Will Stewart Operations Manager, Malosa Medical

“Airology completed our installation with a high degree of professionalism and knowledge. P3 would have no hesitation in recommending the company for similar projects.”

Simon TalbotManaging Director, P3 Medical Ltd

“We would like to thank you for the way the works were carried out to a high standard with the minimum of disruption. From concept to completion your staff were very helpful and professional throughout. We would be pleased to recommend you in the future without hesitation.”

Dr SilvaPerfect Image Consultants

“The quality of the work has been to a high standard and the people who have worked on the project have been exceptional. There were some challenges to be dealt with, but as we thought the Airology team was first class at solving the problems and kept the project to time and to budget.”

Nigel SouthernRidgeway Biologicals

“I have worked with Airology for several years and always found them to be reliable and responsive in regard to the servicing and maintenance of our HVAC equipment.”

Colin Welsh Orbit Group

Other Case Studies…

All

Paragraf, Somersham - ISO 6 & ISO 8 Cleanrooms

They required a GMP Grade B, C and D cleanroom facility with temperature control, filtration, pressure monitoring and ventilation.